Hypertufas are generally built as planters and garden adornments as they are very light and sturdy, being able to tolerate intense winter conditions, as opposed to those that are produced from concrete. Hypertufas can be simply created by anybody on their own house, using household things, as long as that they have the appropriate ingredients. However, in order to properly construct one for your garden, you must follow the instructions thoroughly as a small error could badly have an impact on the end result of your project. Probably the most important step in the construction of hypertufas is the curing process as it will basically determine if your project is a failure or success.

The curing procedure in creating hypertufas takes place after applying the mixture to the mold. Always keep in mind that if you wish for your mixture to stay intact in the mold, you should make sure that it has a good quantity of moisture. As a result wind breezes are hazards when making hypertufas as it can rob the moisture off your mixture. Thus it is smart to work in sheltered locations to avoid breezes.

Another essential step in curing your hypertufa is storing it in a plastic or garbage bag. The reason for this is to make sure that your wet hypertufa is safe from outside elements like wind and debris. In addition, it seals in the moisture to ensure that your creation will not fall apart. Just after about one to three days, check your creation by scratching it with your fingernail; if it cannot be scratched with your fingernail any longer, then you may already get rid of the mold off your creation. You can smoothen the rough edges or include texture to your hypertufa using a wire brush but you still need to be cautious as it is still fragile.

Immediately after taking out the mold, place your creation once again in the plastic or garbage bag and leave it in an area where it will not be disturbed or meddled with. You must also preserve the moisture of your hypertufa by periodically misting it with water. Depending on the size of your project and the humidity and temperature of the location, the curing procedure could take for approximately a month for it to be completely dried and usable. You’ll be aware that your hypertufa is thoroughly cured once it produces a hollow sound when you knock on it.